Preparative separation of immunoglobulins from bovine colostrum by continuous divergent-flow electrophoresis

Immunoglobulins in bovine colostrum were separated and fractionated from other proteins using the method and instrumentation developed in our laboratory. The proposed separation was based on bidirectional isotachophoresis/moving boundary electrophoresis with electrofocusing of the analytes in a pH gradient from 3.9 to 10.1. The preparative instrumentation included the trapezoidal non-woven fabric that served as separation space with divergent continuous flow. The defatted and casein precipitate-free colostrum supernatant was loaded directly into the instrument without any additional colostrum pre-preparation. Immunoglobulin G was fractionated from other immune proteins such as bovine serum albumin, β-lactoglobulin, and α-lactalbumin, and was continuously collected in separated fractions over 3 h. The fractions were further processed, and isolated immunoglobulin G in the liquid fractions was confirmed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and by re-focusing in gel isoelectric focusing. Separated immunoglobulin G was detected in seven fractions by sodium dodecyl sulfate-polyacrylamide gel electrophoresis with a gradually decreased concentration in the fractions. Re-focusing of the proteins in the fractions by gel isoelectric focusing revealed multiple separated zones of immunoglobulin G with the isoelectric point values covering the range from 5.4 to 7.2. Each fraction contained distinct zones with gradually increased isoelectric point values and decreased concentrations from fraction to fraction.     

氧化环境和比例对改性Hummers法制备GO的影响

以鳞片石墨(GR)为原料,采用改性Hummers法液相氧化方法制备氧化石墨,通过超声剥离的方法剥离出片状的氧化石墨烯(GO),探讨了H₂SO₄环境与H₂SO₄+H₃PO₄混酸环境和KMnO₄与GR的比例对GO制备的影响。采用FTIR、UV、TG、XRD、SEM和XPS等分析手段对制备的GO进行分析。结果表明：GO外貌是呈褶皱片状,在片层上主要有C=O、C-OH、-COOH和C-O-C等官能团,以共价键形式存在石墨层间;通过TG与XPS数据分析表明在H₂SO₄ H₃PO₄混酸环境下制备的GO含氧官能团较多,并且(KMnO₄)与鳞片石墨的最佳比例是1:4。     

Theoretical study of the structural,elastic, electronic and optical properties of XCaF3 (X = K and Rb)

The PLANE WAVE pseudo-potential method within density functional theory (DFT) has been used to investigate the structural, elastic, electronic and optical properties of XCaF₃ (X = K and Rb) insulating. The studied compounds show a weak resistance to shear deformation compared to the resistance to the unidirectional compression. KCaF₃ and RbCaF₃ are considered ductile. The elastic constants and related parameters were predicted. The stiffness is more important in KCaF₃, whereas, the lateral expansion is more important in RbCaF₃. KCaF₃ and RbCaF₃ have R- Г indirect band gap. The main peaks in the imaginary part of the dielectric function correspond to the transition from the occupied state F₋p to the unoccupied states Ca: s or K, Rb: p. At lower energies, KCaF₃ and RbCaF₃ show the same optical properties. Under pressure effect, the peaks of imaginary part of dielectric function were shifted toward high energy.     

A Three‐Minute Synthesis and Purification of Ibuprofen: Pushing the Limits of Continuous‐Flow Processing

In a total residence time of three minutes, ibuprofen was assembled from its elementary building blocks with an average yield of above 90 % for each step. A scale‐up of this five‐stage process (3 bond‐forming steps, one work‐up, and one in‐line liquid–liquid separation) provided ibuprofen at a rate of 8.09 g h^?1 (equivalent to 70.8 kg y^?1) using a system with an overall footprint of half the size of a standard laboratory fume hood. Aside from the high throughput, several other aspects of this synthesis expand the capabilities of continuous‐flow processing, including a Friedel–Crafts acylation run under neat conditions and promoted by AlCl₃, an exothermic in‐line quench of high concentrations of precipitation‐prone AlCl₃, liquid–liquid separations run at or above 200 psi to provide solvent‐free product, and the use of highly aggressive oxidants, such as iodine monochloride. The use of simple, inexpensive, and readily available reagents thus affords a practical synthesis of this important generic pharmaceutical.     

Effects of GC temperature and carrier gas flow rate on on‐line oxygen isotope measurement as studied by on‐column CO injection

Although deemed important to δ¹⁸O measurement by on‐line high‐temperature conversion techniques, how the GC conditions affect δ¹⁸O measurement is rarely examined adequately. We therefore directly injected different volumes of CO or CO–N₂ mix onto the GC column by a six‐port valve and examined the CO yield, CO peak shape, CO–N₂ separation, and δ¹⁸O value under different GC temperatures and carrier gas flow rates. The results show the CO peak area decreases when the carrier gas flow rate increases. The GC temperature has no effect on peak area. The peak width increases with the increase of CO injection volume but decreases with the increase of GC temperature and carrier gas flow rate. The peak intensity increases with the increase of GC temperature and CO injection volume but decreases with the increase of carrier gas flow rate. The peak separation time between N₂ and CO decreases with an increase of GC temperature and carrier gas flow rate. δ¹⁸O value decreases with the increase of CO injection volume (when half m/z 28 intensity is <3 V) and GC temperature but is insensitive to carrier gas flow rate. On average, the δ¹⁸O value of the injected CO is about 1‰ higher than that of identical reference CO. The δ¹⁸O distribution pattern of the injected CO is probably a combined result of ion source nonlinearity and preferential loss of C¹⁶O or oxygen isotopic exchange between zeolite and CO. For practical application, a lower carrier gas flow rate is therefore recommended as it has the combined advantages of higher CO yield, better N₂–CO separation, lower He consumption, and insignificant effect on δ¹⁸O value, while a higher‐than‐60 °C GC temperature and a larger‐than‐100 µl CO volume is also recommended. When no N₂ peak is expected, a higher GC temperature is recommended, and vice versa. Copyright © 2015 John Wiley & Sons, Ltd.     

Chemical Evolution of a Bacterial Proteome

We have changed the amino acid set of the genetic code of Escherichia coli by evolving cultures capable of growing on the synthetic noncanonical amino acid L ‐β‐(thieno[3,2‐b]pyrrolyl)alanine ([3,2]Tpa) as a sole surrogate for the canonical amino acid L ‐tryptophan (Trp). A long‐term cultivation experiment in defined synthetic media resulted in the evolution of cells capable of surviving Trp→[3,2]Tpa substitutions in their proteomes in response to the 20 899 TGG codons of the E. coli W3110 genome. These evolved bacteria with new‐to‐nature amino acid composition showed robust growth in the complete absence of Trp. Our experimental results illustrate an approach for the evolution of synthetic cells with alternative biochemical building blocks.     

Experimental Investigation on Binary Phase Diagram of the Thermotropic Phase Transitions Compounds (n‐CnH2n+1R3)2ZnCl4

The thermotropic phase transitions compounds (n‐C_nH_2n+1R₃)₂ZnCl₄ as well as a series of their binary mixtures were prepared by a solution reflux method from their ethanol solutions. The experimental subsolidus binary phase diagram of [n‐C₁₈H₃₇N(CH₃)₃]₂ZnCl₄‐[n‐(C₁₈H₃₇)₂N(CH₃)₂]₂ZnCl₄ is constructed over the entire composition range by differential scanning calorimetry(DSC) and X‐ray. Experi‐ mental results indicate one stable intermediate phase [n‐C₁₈H₃₇N(CH₃)₃] [n‐(C₁₈H₃₇)₂N(CH₃)₂]ZnCl₄ at W_C18C3Zn %=59.75 %, and two invariant three phase equilibria, which shows two eutectoid temperatures: Te₁ at 310±1 K for eutectoid point W_C18C3Zn %=36.24 %, Te₂ at 313±1 K for eutectoid point W_C18C3Zn %=80.17 %. These three noticeable solid‐solution ranges are α‐phase at the left, ?‐phase at the right, and ψ‐phase in the middle of the phase diagram. It is (n‐C_nH_2n+1R₃)₂ZnCl₄ systems as phase change materials that are characterized the phase transition temperatures T in the range of 310 to 340 K, the transition enthalpies ΔH in the range of 38.40 and 168.72 J/g between two polymorphic forms.     

Low‐memory iterative density fitting

A new low‐memory modification of the density fitting approximation based on a combination of a continuous fast multipole method (CFMM) and a preconditioned conjugate gradient solver is presented. Iterative conjugate gradient solver uses preconditioners formed from blocks of the Coulomb metric matrix that decrease the number of iterations needed for convergence by up to one order of magnitude. The matrix‐vector products needed within the iterative algorithm are calculated using CFMM, which evaluates them with the linear scaling memory requirements only. Compared with the standard density fitting implementation, up to 15‐fold reduction of the memory requirements is achieved for the most efficient preconditioner at a cost of only 25% increase in computational time. The potential of the method is demonstrated by performing density functional theory calculations for zeolite fragment with 2592 atoms and 121,248 auxiliary basis functions on a single 12‐core CPU workstation. © 2015 Wiley Periodicals, Inc.     

Application of a multivariate approach for analyte focusing by micelle collapse‐micellar electrokinetic chromatography for analyzing sunscreen agents in cosmetics

The operating parameters that affect the performance of the online preconcentration technique “analyte focusing by micelle collapse‐MEKC (AFMC‐MEKC)” were examined using a multivariate approach involving experimental design to determine the sunscreen agents in cosmetics. Compared to the single‐variable approach, the advantage of the multivariate approach was that many factors could be investigated simultaneously to obtain the best separation condition. A fractional factorial design was used to identify the fewest significant factors in the central composite design (cCD). The cCD was adopted for evaluating the location of the minimum or maximum response in this study. The influences of the experimental variables on the response were investigated by applying a chromatographic exponential function. The optimized condition and the relationship between the experimental variables were acquired using the JMP software. The ANOVA analysis indicated that the Tris pH value, SDS concentration, and ethanol percentage influenced the separation quality and significantly contributed to the model. The optimized condition of the running buffer was 10 mM Tris buffer (pH 9.5) containing 60 mM SDS, 7 mM γ‐CD, and 20% v/v ethanol. The sample was prepared in 100 mM Tris buffer (pH 9.0) containing 7.5 mM SDS and 20% v/v ethanol. The SDS concentration in the sample matrix was slightly greater than the CMC value that makes the micelle be easily collapsed and the analytes be accumulated in the capillary. In addition, sunscreen agents in cosmetics after 1000‐fold dilution were successfully determined by AFMC‐MEKC.     

Stability of ion triplets in ionic liquid/lithium salt solutions: Insights from implicit and explicit solvent models and molecular dynamics simulations

Binding energies of ion triplets formed in ionic liquids by Li⁺ with two anions have been studied using quantum‐chemical calculations with implicit and explicit solvent supplemented by molecular dynamics (MD) simulations. Explicit solvent approach confirms variation of solute‐ionic liquid interactions at distances up to 2 nm, resulting from structure of solvation shells induced by electric field of the solute. Binding energies computed in explicit solvent and from the polarizable continuum model approach differ largely, even in sign, but relative values generally agree between these two models. Stabilities of ion triplets obtained in quantum‐chemical calculations for some systems disagree with MD results; the discrepancy is attributed to the difference between static optimized geometries used in quantum chemical modeling and dynamic structures of triplets in MD simulations. © 2015 Wiley Periodicals, Inc.